Skip to content

Cost guide · Las Vegas valley

What a patio cover costs in the Las Vegas valley

Most cost pages for this market give you one blended range and no breakdown. This one gives you the per-square-foot figures by cover type, the arithmetic that turns them into a project price, and the sources behind every number.

Updated 2 August 2026 · Sources verified 2026-08-02 · Independent research, not a contractor

As of August 2026, a patio cover in the Las Vegas valley typically costs $18–$30 per square foot installed for open aluminum lattice, $22–$38 for solid non-insulated aluminum and $32–$55 for an insulated aluminum panel roof — which puts a typical 12 × 20 foot cover at $4,300 to $13,200 installed, before permit fees.

Las Vegas Patio Cover Guide · August 2026

Aluminum patio cover shading a backyard patio in the Las Vegas valley — illustrative stock photo, not an actual local job site.

The headline number, and why we distrust headline numbers

The most-cited figure in this market is "$4,000 to $12,000 installed", published by a local contractor's blog. It is not wrong exactly, but it is one number covering every material, every size and every jurisdiction — and that same company's own detail pages quote up to $18,000 for a 20 by 20 and up to $14,000 for insulated, both above their own stated ceiling.

A blended range like that cannot tell you whether a bid is fair, because it cannot tell you what you are being bid. The useful question is not "what do patio covers cost here" but "what does this cover, at this size, in this city cost". So that is how the rest of this page is organised.

Cost by cover type

Installed cost per square foot, Las Vegas valley, August 2026
Cover typeInstalled, per sq ftWhat you are actually buying
Aluminum lattice (open)$18–$30Open slats. Filters sun, does not block rain. The cheapest permanent cover.
Aluminum solid (non-insulated)$22–$38Full shade and rain cover. A single skin — it gets hot above you.
Insulated aluminum panel$32–$55Foam core between two aluminum skins. The usual Las Vegas upsell.
Wood, site-built$25–$55Looks best, costs most to keep. Needs refinishing every few years here.
Louvered / motorized$55–$130Pivoting slats, opened and closed on demand. A different price class.

A few things worth drawing out of that table before you take a bid:

  • Lattice to insulated is close to a doubling. That single choice moves the price more than size, more than the permit, and far more than any negotiation you will do. Decide it before you shop.
  • Wood is not the cheap option here. National guides often make it look cheap. The only itemised installed quotes we could find put site-built wood above solid aluminum, and that is before you count refinishing every few years in this climate.
  • Louvered systems are a different price class entirely, starting around where insulated aluminum tops out and running well past it. If a louvered pergola is quoted near aluminum pricing, ask hard questions.
  • We do not publish a vinyl range. Our sources disagree by a factor of six on vinyl, which tells us they are pricing two different products. We also would not recommend it here — see the materials guide for the heat-deflection reason.

Cost by finished size

These are the per-square-foot ranges above multiplied by area and rounded to the nearest hundred dollars. They are our arithmetic on sourced inputs, not separately sourced quotes — use them as a bracket to judge a bid against.

Aluminum covers, installed, before permit fees
SizeSq ftAluminum lattice (open)Aluminum solid (non-insulated)Insulated aluminum panel
10 × 10100$1,800–$3,000$2,200–$3,800$3,200–$5,500
12 × 16192$3,500–$5,800$4,200–$7,300$6,100–$10,600
12 × 20240$4,300–$7,200$5,300–$9,100$7,700–$13,200
16 × 20320$5,800–$9,600$7,000–$12,200$10,200–$17,600
20 × 20400$7,200–$12,000$8,800–$15,200$12,800–$22,000
Wood and louvered systems, installed, before permit fees
SizeSq ftWood, site-builtLouvered / motorized
10 × 10100$2,500–$5,500$5,500–$13,000
12 × 16192$4,800–$10,600$10,600–$25,000
12 × 20240$6,000–$13,200$13,200–$31,200
16 × 20320$8,000–$17,600$17,600–$41,600
20 × 20400$10,000–$22,000$22,000–$52,000
A sanity check on our own numbers. Working backwards from the three size-specific pages the largest local competitor publishes, their figures imply roughly $20 to $46 per square foot across styles. Our aluminum range spans $18–$30 to $32–$55. The two independently-derived brackets agree, which is a reasonable sign neither is wildly off.

Permit cost, by city

Permits are not optional here — a building permit is required for a permanent patio cover in every valley jurisdiction, at any size, lattice included. What varies is how much it costs and whether the jurisdiction will tell you in advance.

Published patio cover permit costs, August 2026
Jurisdiction Basis Published figure
City of Henderson Flat, by size band $326 first 200 sq ft (standard plan); $686 custom
Unincorporated Clark County Project valuation, Table 3-A No patio line item published — use the county calculator
City of Las Vegas Occupancy type and square footage No patio row in the published fee table
City of North Las Vegas Project valuation, Table 3-A + $75 admin, $80–$100 plan review
Why two of those rows say nothing

Because the jurisdictions publish nothing. You will find other sites quoting a confident "$150 to $500" for Clark County; that figure is not sourced to the county, which calculates from construction valuation and provides an official calculator instead. We would rather send you to the calculator than repeat a number nobody can stand behind.

Full submittal requirements, standard designs, review times and phone numbers for all four are in the permit guide. If you are in Henderson, the fee arithmetic is worked through step by step on the Henderson cost page — including the standard-plan choice that is worth roughly $860 to $2,360.

Add-ons

These are the line items that turn a $6,000 quote into a $10,000 quote. National ranges unless noted; each row carries its source so you can check the date.

Common patio cover extras
Item Typical cost Source
New concrete slab under the cover $6–$9 per sq ft Angi concrete slab cost guide, updated 2026-04-16
Tearing out an existing cover $100–$400 HomeGuide covered patio cost guide, 2026-02-10
Damp-rated ceiling fan (unit) $150–$500 HomeGuide covered patio cost guide, 2026-02-10
Ceiling fan installation labour $400–$1,000 HomeGuide covered patio cost guide, 2026-02-10
Recessed or surface light, per fixture $80–$300 HomeGuide covered patio cost guide, 2026-02-10
Outdoor outlet $150–$260 Angi motorized pergola cost guide, updated 2026-07-08
Misting system, 100–300 sq ft $700–$1,500 Angi outdoor misting system cost guide, updated 2026-04-06
Misting system, 300–600 sq ft $1,500–$3,000 Angi outdoor misting system cost guide, updated 2026-04-06
Motorised drop screens $3,500–$9,500 Valley Patios pricing guide, 2025-06-19 — a Southern California dealer, not a Las Vegas one; treat as an out-of-market reference point
Engineered, stamped plans (custom builds only) $500–$2,000 This Old House, updated 2026-04-01
Gutters, per linear foot $12–$25 HomeGuide covered patio cost guide, 2026-02-10

The one that catches people is concrete. If there is no slab under your planned cover, pouring one adds $6 to $9 a square foot — on a 240 square foot patio that is $1,440 to $2,160, comparable to the entire gap between a lattice roof and a solid one. Establish early whether a bid includes concrete, because two quotes that look different often differ on exactly this.

How much of the price is labour

Useful for judging whether a bid is padded. Published figures vary by source, and we will show you the spread rather than pick one:

  • A Southern California dealer publishing kit and installed prices side by side in June 2025 quotes installation at $7 to $11 per square foot. Their own worked examples compute to 35 to 42 percent of the installed price.
  • This Old House puts installation at "roughly a third of your total budget".
  • Angi puts labour at 20 to 30 percent of project total for louvered systems.
  • Fixr quotes labour at $25 to $40 per square foot, which is hard to reconcile with the others and which we flag rather than average in.

Taken together, roughly a third of an installed aluminum patio cover price is labour. That is a reasonable expectation to hold, not a rule.

Why the valley runs a little cheaper than national figures

Two structural reasons, both worth knowing because they are also negotiating context.

No frost depth. Clark County's adopted frost line is one foot, so patio cover posts can frequently bear directly on an existing slab rather than on dug and poured footings. That removes real excavation and concrete cost that colder-climate national averages carry.

Volume and a mature aluminum supply chain. Aluminum dominates this market, which means installers are working with systems they build every week, on repeat details, with manufacturer engineering already done. That is the opposite of the custom-build premium national averages tend to embed.

Pushing the other way: a 98 mph ultimate design wind speed at Exposure Category C is a real engineering requirement, and anything custom needs a Nevada engineer's stamp at $500 to $2,000.

How we priced this

Every figure on this page comes from one of three places, and we say which every time: a published government fee schedule, a dated cost guide that publishes its own methodology, or arithmetic we did on those — always labelled as ours.

  1. Per-square-foot ranges are anchored on the only two publishers quoting Las Vegas valley pricing specifically — a Henderson and Las Vegas contractor publishing per-square-foot figures updated October 2025, and a local company's size-specific pages from early 2026 — then cross-checked against four national guides that publish methodology: HomeGuide, Angi, This Old House and Fixr, dated between February 2025 and July 2026.
  2. Total-project figures are those ranges multiplied by area and rounded to the nearest $100. They are brackets, not quotes.
  3. Permit figures are the jurisdictions' own published rates. Where a jurisdiction publishes nothing, we publish nothing.
  4. Every price on this website lives in one file and is rendered from it, so a figure cannot say one thing on this page and something else on the Henderson page. That is a structural choice, not a promise.
  5. We date everything and we recheck it. These figures are current as of August 2026; sources were last verified 2026-08-02.

Where our sources disagree

Cost guides usually hide this. We think the disagreements are the most informative part of the data, because they tell you where to press a contractor.

  • Site-built wood. National cost guides put wood at $15–$38 per square foot installed. The only itemised installed quotes we could find — a Southern California dealer publishing kit and installed prices side by side in June 2025 — compute to $42–$50 per square foot. We publish $25–$55 and weight it toward the real installed quotes, because the national figures appear to price the lumber package rather than a finished, permitted structure.
  • Vinyl. Vinyl is the worst disagreement in the whole data set: one guide says $25–$80 per square foot, two others say $5–$15. That is a six-fold spread, and it is almost certainly two different products — a vinyl structure versus vinyl roof panels. We do not publish a vinyl range at all, because we cannot tell you which one you would be buying. We also do not recommend vinyl here; see the materials guide for the heat-deflection reason.
  • Attached versus freestanding. One national guide prices freestanding covers about $3,000 higher than attached; another says attached costs more because the roofline has to be matched. Both are defensible and they describe different situations, so we do not publish a single premium either way.
  • Louvered brand pricing versus the louvered category range. One national guide caps motorised louvered systems at $125 per square foot and then, on the same page and the same date, prices the best-known brand at $150 to $200 per square foot — above its own stated ceiling. We are not resolving that, because the contradiction is informative: brand-level pricing in this category sits above the category range, and published ranges do not reliably contain the flagship products. Treat any louvered range, including ours, as excluding the premium brands.
  • Premium louvered brands. Third-party estimates for the best-known motorised louvered brand range from $60 to $200 per square foot depending on who is publishing. The manufacturer does not publish pricing. Treat any number you see for these systems, including ours, as a rough bracket only.

Common questions

How much does a patio cover cost in Las Vegas?
As of August 2026, a typical 12 × 20 foot patio cover in the Las Vegas valley costs $4,300 to $13,200 installed, depending on whether you choose open aluminum lattice at the low end or an insulated aluminum panel roof at the high end. Permit fees are additional and vary by jurisdiction.
What is the cheapest type of patio cover in Las Vegas?
Open aluminum lattice, at $18–$30 per square foot installed. It filters sun rather than blocking it and it does not keep rain off, but it is the cheapest permanent, permitted structure and it holds up well in desert heat.
Is an insulated patio cover worth it in Las Vegas?
It costs roughly one and a half to two times a solid non-insulated cover, and the physics of the foam core are sound. What no manufacturer publishes is a measured temperature difference between insulated and non-insulated covers under real conditions — and one major dealer concedes in writing that the difference 'can be very little'. Peer-reviewed research from a neighbouring desert city suggests the large comfort gain comes from blocking direct sun at all, with insulation a second-order improvement on top.
How much does a 12x20 patio cover cost in Las Vegas?
A 12 by 20 foot cover is 240 square feet. In the Las Vegas valley as of August 2026 that works out to roughly $4,300–$7,200 for aluminum lattice, $5,300–$9,100 for solid non-insulated aluminum, and $7,700–$13,200 for an insulated panel roof, installed, before permit fees.
Does a patio cover need a permit in Las Vegas, and what does it cost?
Yes, everywhere in the valley. Henderson publishes flat fees — $326 for the first 200 square feet from a standard plan. Clark County and the City of Las Vegas publish no patio line item and calculate from project valuation, so we point you at the county's official calculator rather than quoting a figure neither city publishes.
Do patio covers add value to a Las Vegas home?
We have not found credible Las Vegas-specific resale data, so we are not going to quote a return-on-investment percentage the way some guides do. What we can say concretely is that unpermitted work reliably subtracts value at resale, because the structure will not appear in county records when a buyer's inspector is standing under it.

Related cost guides

Sources

  1. Ultra Patios — Alumawood and EliteWood per-square-foot pricing, Las Vegas and Henderson — published 2 February 2025, updated 17 October 2025
  2. Patio Cover Concepts — Las Vegas cost and size-specific pages — dated January–February 2026
  3. HomeGuide — covered patio cost guide — dated 10 February 2026
  4. HomeGuide — Alumawood patio cover cost — dated 27 September 2024 — the oldest source we rely on, flagged accordingly
  5. Angi — patio cover installation cost — updated 30 May 2026
  6. This Old House — cost to add a roof over a patio — updated 1 April 2026
  7. Fixr — covered patio cost — updated 3 February 2025
  8. Valley Patios — 2025 pricing guide (kit versus installed, labour split) — dated 19 June 2025; Southern California, used for the labour-share calculation only
  9. City of Henderson — Building Miscellaneous Fees, Table B — effective October 1, 2025
  10. Clark County — official permit fee calculator

Get quotes from local patio cover contractors

Tell us what you are planning. We pass it to independent contractors who work in your jurisdiction — you compare their bids yourself.

Form not live yet

Lead capture is not connected on this build. Nothing typed below is sent or stored. This message is intentional — it is here so a real request can never be silently dropped.

We research this market and pass homeowner requests to independent local patio cover contractors. We are not a contractor and we do not build patio covers.

Las Vegas Patio Cover Guide is an independent research and referral service operated by AuthenitcBrand, LLC. We are not a licensed contractor, we do not perform construction work, and we do not sell patio covers. When you send a request through this site we pass it to an independent local contractor who is licensed to do the work. Any quote, contract, warranty and workmanship is between you and that contractor. Always verify a contractor's licence, status and monetary limit yourself at nvcontractorsboard.com before signing anything or paying a deposit.

Get quotes